Enclosure

For this assignment, we had to créate an enclosure.

For the box, I choose to buy one pre-made the wooden box at the container store and just focused on the lid.
I had the idea to cover the box with acrylic from the bottom part of the side to the bottom part of the other one. My first test was to bend a piece of acrylic to see how this would work but very soon I realized that acrylic was not the best material to bend on a 90 degree. Probably a thin piece of metal would work.

So then I decided to do just a cover lid and get some switches. After I did the design on illustrator I used the laser cutter machine. I edged 10 times the texts and lines and then cut the piece and holes for switches.

To have the black letters I used a sharpie and an erase dry marker.

01
02
03
04
05
06
10
11
12
Please pass the disqus shortname